CDCVF2505PW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | PLL Clock Driver |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 200MHz |
| Base Part Number | CDCVF2505 |
| Pin Count | 8 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 25pF |
| Nominal Supply Current | 5μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Input | LVTTL |
| Ratio - Input:Output | 1:5 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCVF2505PW Overview
This clock IC is packaged using the Tube method. The 8-TSSOP (0.173, 4.40mm Width) package contains this clock generator. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 8 terminations can be found in frequency generators. A voltage of 3.3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be LVTTL. To access the electronic component's full performance, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can easily be installed on a panel. The maximum voltage this clock PLL can handle is 3.6V. A maximum voltage of 3V should be used for this frequency generator for safety reasons. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. It has been classified as a PLL Clock Driver electronic part, which means that it is a semiconductor. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. You can find related electrical components to the base part number CDCVF2505. It is possible to connect to the frequency generators via 8 pins. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. 4 signal outputs allow for maximi4ation of output frequency. High efficiency is achieved when operating at a frequency of 200MHz. In terms of load capacitance, analog clock generator is capable of delivering 25pF.
CDCVF2505PW Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 25pF
CDCVF2505PW Applications
There are a lot of Texas Instruments CDCVF2505PW Clock Generators applications.
- Antenna automatic tracking
- Media broadcast servers
- VSAT (Small Ground Satellite Station)
- GPS systems
- Wi-Fi routers
- Phase modulation cellular systems
- Microwave backhaul IF
- Automatic control
- Signal modulation and demodulation
- MRI