CDCV304PW
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 200MHz |
| Base Part Number | CDCV304 |
| Pin Count | 8 |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Nominal Supply Current | 37mA |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 3 ns |
| Family | 304 |
| Number of Inputs | 1 |
| Bandwidth | 140MHz |
| Input | LVTTL |
| Ratio - Input:Output | 1:4 |
| Differential - Input:Output | No/No |
| Input Current | 5μA |
| Max Junction Temperature (Tj) | 125°C |
| Ambient Temperature Range High | 85°C |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
CDCV304PW Overview
It's a electronic part of the 8-TSSOP (0.173, 4.40mm Width) package. There is a case available for the circuit clock in Tube. A total of 8 terminations are present. High efficiency is feasible with a supply voltage of 2.5V. In this case, it is set up as Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). Setting the temperature to -40°C~85°C will ensure reliable performance. The clock switch should operate with a voltage of 2.3V~3.6VV. In this case, it is placed in the way of Surface Mount. There is a pin count of 8 on timeing clock. During operation, 8 pins are used. This object belongs to the CDCV304 family. It is contained in Clock Drivers. The buffer IC belongs to the 304 family. There is a 3.6V maximum supply voltage set (Vsup). As a general rule, the supply voltage (Vsup) should be maintained above 2.3V. As a default, it outputs 4. A 3.3V volt supply powers it. It is capable of maintaining excellent accuracy with a frequency of 200MHz. It is configured when there is a 1 input.
CDCV304PW Features
8 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 200MHz frequency
CDCV304PW Applications
There are a lot of Texas Instruments CDCV304PW Clock Buffers & Drivers applications.
- Clock signal format conversion
- Handheld test instruments
- DDR4 JEDEC standard RDIMM design
- Data transmission
- DDR4 JEDEC standard LRDIMM design
- Big data
- Tlecom applications
- Aviation
- Clock signal duplication
- Cell Phone (UMTS/WCDMA/GSM)