CDCE949PW
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 160MHz |
| Base Part Number | CDCE949 |
| Output | LVCMOS |
| Pin Count | 24 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 1.8V |
| Number of Elements | 4 |
| Interface | Serial |
| Number of Circuits | 1 |
| Operating Supply Current | 38mA |
| Nominal Supply Current | 38mA |
| Max Supply Current | 38mA |
| Frequency (Max) | 230MHz |
| Logic Function | Clock |
| Input | LVCMOS, Crystal |
| Ratio - Input:Output | 1:9 |
| Primary Clock/Crystal Frequency-Nom | 32MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | PLL Clock Generator |
| Voltage - Supply | 1.7V~1.9V |
| Terminal Position | DUAL |
CDCE949PW Overview
It is packaged using the Tube method since it is a clock IC. The 24-TSSOP (0.173, 4.40mm Width) package includes this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As you can see, it consists of 24 terminations. Clock generator ics require a voltage of 3.3V. LVCMOS, Crystal is designed for clock generator's input. There are 1 circuits implemented in order to achieve full performance from this electronic part. A clock-based RF synthesizer that provides a max frequency of 230MHz is available. PLL clock is mounted in the way of Surface Mount. As far as the supply voltage is concerned, clock PLL can be used with 1.7V~1.9V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. LVCMOS is designed for clock generator's output. PLL Clock Generator is the type of electrical part that this component is classified as. The clock-generating IC is a 24-bit device designed specifically for microprocessors. This part number CDCE949 is related to the following electrical components. Clock generator is designed with 24 pins. Time clock generator can handle a voltage of 1.8V as the supply voltage. Clock PLL has 9 signal outputs to maximi9e output frequency. High efficiency is achieved when operating at a frequency of 160MHz. A supply current of 38mA is required to fully operate clock PLL. In this case, we are looking at a frequency generator with 4 elements that is low-jitter. This frequency synthesizer operates at a maximum current of 38mA. PLL is able to deliver the logic function of Clock.
CDCE949PW Features
Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 1.8V
CDCE949PW Applications
There are a lot of Texas Instruments CDCE949PW Clock Generators applications.
- Clock signals to the high-speed Digital RF circuits
- Radiotelephones
- Small signal recovery
- Test equipment
- Peripheral devices
- Mobile telephones
- Set-top boxes
- Mixed mode (analog and digital) applications
- Frequency synthesis
- Multi-function printers