CD74HCT74M
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 35 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 53 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT74M Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. In the configuration, Differentialis used as the output. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of -55°C~125°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74HCT series. There should be no greater frequency than 50MHzon its output. It consumes 4μA of quiescent 14terminations have occurred. Members of the 74HCT74family make up this object. A voltage of 5V is used to power it. A JK flip flop with a 10pFfarad input capacitance is used here. Electronic devices of this type belong to the HCTfamily. There is an electronic component mounted in the way of Surface Mount. There are 14pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part you are looking for is included in FF/Latches. An electrical current of 5V volts is applied to it. Optimal efficiency requires a supply voltage of 5V. With an output current of 4mA, this device offers maximum design flexibility. There are 1 output lines in this JK flip flop. 2is the number of channels.
CD74HCT74M Features
Tube package
74HCT series
14 pins
5V power supplies
CD74HCT74M Applications
There are a lot of Texas Instruments CD74HCT74M Flip Flops applications.
- Individual Asynchronous Resets
- Load Control
- Common Clocks
- Supports Live Insertion
- Frequency Divider circuits
- EMI reduction circuitry
- 2 – Bit synchronous counter
- Cold spare funcion
- Automotive
- Circuit Design