CD74HCT574M96G4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 33 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 50 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Input Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT574M96G4 Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. Currently, the output is configured to use Tri-State, Non-Inverted. This trigger uses the value Positive Edge. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is at -55°C~125°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74HCT series. A frequency of 60MHzshould be the maximum output frequency. A total of 1elements are contained within it. Currently, there are 20 terminations. You can search similar parts based on 74HCT574. Power is supplied from a voltage of 5V volts. A JK flip flop with a 10pFfarad input capacitance is used here. It is a member of the HCTfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. It is included in FF/Latches. The flip flop is designed with 8bits. Due to its reliability, this T flip flop is well suited for TR. The power supply is 5V. The flip flop has 2embedded ports. Optimal efficiency requires a supply voltage of 5V. A total of 8input lines have been provided. It consumes 8μA of quiescent current without being affected by external factors.
CD74HCT574M96G4 Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
CD74HCT574M96G4 Applications
There are a lot of Texas Instruments CD74HCT574M96G4 Flip Flops applications.
- Supports Live Insertion
- Circuit Design
- Single Down Count-Control Line
- Count Modes
- Differential Individual
- QML qualified product
- Control circuits
- Frequency division
- 2 – Bit synchronous counter
- EMI reduction circuitry