CD74HCT573DBR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 53 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 35 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT573DBR Overview
20-SSOP (0.209, 5.30mm Width) contains it. A Tape & Reel (TR) package is used to package it. In this configuration, the output is set to Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Mounting this electronic component follows the Surface Mount method. With a supply voltage of 4.5V~5.5V, it operates. A temperature of -55°C~125°C is set as the operating temperature. The 74HCT series of FPGAs is the one this FPGA belongs to. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. This type belongs to the 74HCT573 family. The device works with a voltage of 5V for its supply voltage. The device is equipped with 20 pins. It is a member of the HCT family of electronic devices. 20 pins are used in its design. Surface Mount is the way in which this electronic part is mounted. As far as ports are concerned, this device has 2 ports. In the subcategory FF/Latches, this part belongs. 5V power supplies are needed to operate it. Considering the reliability of this device, it would be a good candidate for TR. With an output current of 6mA, it is highly flexible in terms of design. A high level of efficiency is achieved by maintaining the supply voltage at 5V. 8 output lines generate the binary equivalent of the input lines. The quiescent current consumed by it is 8μA because it is unaffected by external factors. A total of 1 elements are contained in it.
CD74HCT573DBR Features
20-SSOP (0.209, 5.30mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
5V power supplies
1 elements
CD74HCT573DBR Applications
There are a lot of Texas Instruments CD74HCT573DBR Latches applications.
- Counters
- Up/down difference counting
- Serial Input
- High-speed logic
- Motor Drives
- Address register
- Control circuits
- Automotive ADAS
- Timers
- Automotive Body Electronics