CD74HCT4094EE4
| Parameters | |
|---|---|
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Max I(ol) | 0.004 A |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Output Lines | 10 |
| fmax-Min | 60 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 43 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 43 ns |
| Family | HCT |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
CD74HCT4094EE4 Overview
PDIP is a package containing the embedded device. Chip terminations add up to 16. There is a Rail/Tube case containing it. Its operating supply voltage is rated at 5V. It is a part that has 1 elements on it. Devices with 16 pins are available. Mounting by Through Hole is recommended. This electronic component is classified as HCT. It is noted that the operating supply voltage of this chip falls within the range 5V. This section has the following additional features: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. Voltage can be delivered at 5V by the device. The total number of IC chip bits is 8. There are a total of 16 pins on it. A temperature below 125°C is recommended for its use. It should not be lower than -55°C to operate this device. Under 5.5V, this supply voltage is employed. Voltages higher than 4.5V are used for this supply. 10 output lines are available for operation. There is a quiescent current of 8μA running through it. The subcategory in which it falls belongs to is Shift Registers.
CD74HCT4094EE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 10 output lines
Quiescent Current at 8μA
CD74HCT4094EE4 Applications
There are a lot of Texas Instruments CD74HCT4094EE4 Shift Registers applications.
- Sequence generator
- 7-segment display control
- Delay Line
- data transfer
- Serial-to-parallel data conversion
- ROM Chips
- Serial to parallel converter
- Interconnectors
- Data Processors
- Remote control holding register