CD74HC74MTG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Number of Bits | 1 |
| Propagation Delay | 175 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.004 A |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC74MTG4 Overview
It is embeded in SOIC case. It is contained within the Tape & Reel (TR)package. In total, it contains 2 elements. Terminations are 14. Power is supplied from a voltage of 4.5V volts. Electronic devices of this type belong to the HC/UHfamily. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. Flip flops designed with 1bits are used in this part. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The number of input lines is 1. It consumes a total of 4μA quiescent current at any given time. A high level output current of -5.2mAis set. There is no low level output current set at 5.2mA. Ideally, the operating temperature should be below 125°C. In order for the system to operate properly, the temperature should be higher than -55°C. Despite its minimal supply voltage of 2V, it is capable of operating. The maximum supply voltage supported by the flip flop is 6V. It is possible to achieve a frequency of 50MHz. This logic IC is D FLIP-FLOP. A total of 2 functions are available on the T flip flop. With 14 pins, it is equipped with a low power consumption. It features maximum design flexibility due to the 5.2mA output current.
CD74HC74MTG4 Features
Tape & Reel (TR) package
14 pins
1 Bits
2 Functions
14 pin count
CD74HC74MTG4 Applications
There are a lot of Texas Instruments CD74HC74MTG4 Flip Flops applications.
- Event Detectors
- Synchronous counter
- Latch-up performance
- ESD performance
- Cold spare funcion
- Individual Asynchronous Resets
- Divide a clock signal by 2 or 4
- Dynamic threshold performance
- High Performance Logic for test systems
- Counters