CD74HC595DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC595DWG4 Overview
In package SOIC, there is an embedded device. A total of 16 terminations can be found on the chip. There is a Rail/Tube case containing it. Voltage rating of the part is 5V. This part has 1 elements. 16 pins are located on the device. It is recommended to mount by Surface Mount. An electronic component is included in the HC/UH. A range of 5V is noted as the operating supply voltage of this chip. It has 8 bits in total. In total, it has 16 pins. A temperature below 125°C is recommended for its use. Ideally, it should not fall below -55°C. We use this supply voltage under 6V. This supply voltage is employed higher than 2V. It is necessary to operate 9 output lines.
CD74HC595DWG4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
CD74HC595DWG4 Applications
There are a lot of Texas Instruments CD74HC595DWG4 Shift Registers applications.
- Remote control holding register
- Parallel data
- Data Format Converters
- Delay Line
- LED matrix control
- Sequence generator
- Serial-to-parallel data conversion
- Flash Memory
- Remote control holding register
- Serial to parallel converter