CD74HC534E
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74HC534 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 165 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC534E Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). It is included in the package Tube. Tri-State, Invertedis the output configured for it. It is configured with the trigger Positive Edge. Through Holeis in the way of this electric part. The JK flip flop operates at 2V~6Vvolts. It is at -55°C~125°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 60MHz. A total of 1elements are present in it. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74HC534 family. A voltage of 4.5V provides power to the D latch. There is 10pF input capacitance for this T flip flop. It is a member of the HC/UHfamily of D flip flop. There is an electronic part that is mounted in the way of Through Hole. There are 20pins on it. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in Bus Driver/Transceiver. There are 8bits in its design. There is a 6Vmaximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. Its flexibility is enhanced by 8 circuits. In order for the device to operate, it requires 2/6V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a result of its output current of 7.8mA, it is very flexible in terms of design. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Quiescent current is consumed by the D latch in the amount of 8μA.
CD74HC534E Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
CD74HC534E Applications
There are a lot of Texas Instruments CD74HC534E Flip Flops applications.
- Shift Registers
- Power down protection
- Registers
- Pattern generators
- Latch
- Consumer
- Frequency division
- Parallel data storage
- Patented noise
- Modulo – n – counter