CD74HC4094PWRE4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC4094 |
| Function | Serial to Parallel |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 33 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| Number of Output Lines | 10 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC4094PWRE4 Overview
16-TSSOP (0.173, 4.40mm Width) is the package in which the device is embedded. Taking the total number of terminations on the chip and adding them up, we get 16. A Tape & Reel (TR) case is used to pack it. A voltage of 4.5V is specified for the part's operating supply. In this device, there are 16 pins. Using Surface Mount as a mount point is recommended. There is an electronic component in the HC/UH. Its mounting method is Surface Mount. A temperature range of -55°C~125°C is used for the operating environment. There is a votage of 2V~6V provided with it. It is part of the 74HC series of electrical components. Search for similar parts based on the 74HC4094 family. 5V is noted as the operating supply voltage of this chip. Additional aspects of this section are as follows: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. The minimum supply voltage (Vsup) for this part should not be less than 2V. This device has 1 input lines available. Devices with voltage delivery capabilities of 2/6V are available. It is recommended that the maximum supply voltage for this part is not greater than 6V (Vsup). It is necessary to operate 10 output lines of the system. There is a quiescent current of 8μA running through it. There is TR packaging for this part.
CD74HC4094PWRE4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC4094 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Quiescent Current at 8μA
Packing Method : TR
CD74HC4094PWRE4 Applications
There are a lot of Texas Instruments CD74HC4094PWRE4 Shift Registers applications.
- Output expansion
- Pattern Recognizers
- 8-bit data storage
- 7-segment display control
- Data manipulation
- Sequence generator
- temporary data storage
- Parallel to serial converter
- Remote control holding register
- data manipulation