CD74HC4094NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 33 ns |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 10 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC4094NSRG4 Overview
There is a SOP package embedded with the device. This chip has a total termination count of 16. It is used to pack in Tape and Reel case. This part has an operating supply voltage of 4.5V. It is a part that has 1 elements on it. Devices with 16 pins are available. It is recommended that the mount should be done by Surface Mount. Electronic components are categorized as HC/UH. A range of 5V is noted as the operating supply voltage of this chip. Taking note of the following additional details: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. A total of 8 bits are present on the IC chip. It has a total of 16 pins. Under temperatures below 125°C, it is recommended to use it. Ideally, it should not fall below -55°C. Under 6V, this voltage is employed. It is necessary to use a voltage that is higher than 2V to provide this supply. There are 10 output lines to operate. There is a subcategory of it called Shift Registers.
CD74HC4094NSRG4 Features
With 16 pins
Operate supply voltage at 5V
With 10 output lines
CD74HC4094NSRG4 Applications
There are a lot of Texas Instruments CD74HC4094NSRG4 Shift Registers applications.
- ROM Chips
- Generate time delay toward digital circuits
- Output expansion
- temporary data storage
- Parallel to serial converter
- Serial-to-parallel data conversion
- Sequence generator
- Parallel data
- Interconnectors
- store data in digital form