CD74HC4094M96G4
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC4094 |
| Function | Serial to Parallel |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 33 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| Number of Output Lines | 10 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC4094M96G4 Overview
There is an embedded device in the package 16-SOIC (0.154, 3.90mm Width). There are 16 terminations on the chip. It is used to pack in Tape & Reel (TR) case. Its operating supply voltage is rated at 4.5V. The device is equipped with 16 pins. It is recommended that the mount should be done by Surface Mount. Electronic components belong to the HC/UH group. The component is positioned in the way of Surface Mount. There is a range of temperatures -55°C~125°C for operation. There is a votage of 2V~6V provided with it. This electrical component belongs to the 74HC series. If you use the 74HC4094 family, you can find parts that are similar. It is noted that the operating supply voltage of this chip falls within the range 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. Ensure that Vsup is not less than 2V when powering this part. In this device, there are 1 input lines. Voltage can be delivered at 2/6V. 6V Vsup is the maximum supply voltage (Vsup) for this part. It is necessary to operate 10 output lines of the system. As a result, it runs at a quiescent current of 8μA. To package the part, TR is used.
CD74HC4094M96G4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC4094 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Quiescent Current at 8μA
Packing Method : TR
CD74HC4094M96G4 Applications
There are a lot of Texas Instruments CD74HC4094M96G4 Shift Registers applications.
- Serial-to-parallel data conversion
- LED matrix control
- Remote control holding register
- Parallel data
- Pulse Extenders
- temporary data storage
- Flash Memory
- 8-bit data storage
- data manipulation
- Data Format Converters