CD74HC4067M96
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 180Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC4067 |
| Pin Count | 24 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 8μA |
| Nominal Supply Current | 8μA |
| Propagation Delay | 6 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 300 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 6V |
| Number of Inputs | 16 |
| Supply Type | Single |
| Bandwidth | 89MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Turn-Off Delay Time | 290 ns |
| On-State Resistance (Max) | 160Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 800nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 50pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 51ns, 49ns |
| Channel-to-Channel Matching (ΔRon) | 8.5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 58ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 180Ohm |
| Ambient Temperature Range High | 125°C |
| Signal Current-Max | 0.025A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC4067M96 Overview
Shipping overseas is convenient due to the electrical component's packing in 24-SOIC (0.295, 7.50mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Operational temperature extended around -55°C~125°C TA. In total, 24 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 24 pins. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with 74HC4067. A 180Ohm internal resistance characterizes this multiplexer. The datasheets for the 24 pins explain the functions. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. The digital multiplexer has a low cost Single supply. 2V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 8μA. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. There are 16 inputs to be operated. 89MHz bandwidths enable data to be transferred. This electronic component presents a Drain to Source resistance of 180Ohm.
CD74HC4067M96 Features
1 Channels
8μA Supply Current
Bandwidth: 89MHz
Drain-to-Source resistance: 180Ohm
CD74HC4067M96 Applications
There are a lot of Texas Instruments CD74HC4067M96 Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- Channel Banks
- ISDN NT1/TA
- Mechanical reed relay replacement
- Switching Systems
- Imaging
- Fault Tolerant Systems
- Cross Connects
- Sample hold systems
- PDH Multiplexers