| Parameters |
| Factory Lead Time |
6 Weeks |
| Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
| Contact Plating |
Gold |
| Mount |
Surface Mount |
| Mounting Type |
Surface Mount |
| Package / Case |
24-SOIC (0.295, 7.50mm Width) |
| Number of Pins |
24 |
| Weight |
624.398247mg |
| Operating Temperature |
-55°C~125°C TA |
| Packaging |
Tube |
| JESD-609 Code |
e4 |
| Pbfree Code |
yes |
| Part Status |
Active |
| Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
| Number of Terminations |
24 |
| ECCN Code |
EAR99 |
| Resistance |
160Ohm |
| Subcategory |
Multiplexer or Switches |
| Technology |
CMOS |
| Terminal Position |
DUAL |
| Terminal Form |
GULL WING |
| Peak Reflow Temperature (Cel) |
260 |
| Number of Functions |
1 |
| Supply Voltage |
4.5V |
| Frequency |
89MHz |
| Base Part Number |
74HC4067 |
| Pin Count |
24 |
| Polarity |
Non-Inverting |
| Number of Channels |
1 |
| Number of Circuits |
1 |
| Max Supply Voltage |
6V |
| Min Supply Voltage |
2V |
| Operating Supply Current |
8μA |
| Nominal Supply Current |
8μA |
| Propagation Delay |
6 ns |
| Turn On Delay Time |
64 ns |
| Logic Function |
Demultiplexer, Multiplexer |
| Input Voltage (Max) |
6V |
| Number of Inputs |
16 |
| Supply Type |
Single |
| Bandwidth |
89MHz |
| Supply Current-Max (Isup) |
0.08mA |
| Turn-Off Delay Time |
62 ns |
| On-State Resistance (Max) |
160Ohm |
| High Level Output Current |
25mA |
| Low Level Output Current |
25mA |
| Multiplexer/Demultiplexer Circuit |
16:1 |
| Off-state Isolation-Nom |
75 dB |
| Current - Leakage (IS(off)) (Max) |
800nA |
| Channel Capacitance (CS(off), CD(off)) |
5pF 50pF |
| On-state Resistance Match-Nom |
10Ohm |
| Switch Time (Ton, Toff) (Max) |
51ns, 49ns |
| Channel-to-Channel Matching (ΔRon) |
8.5 Ω |
| Switching |
BREAK-BEFORE-MAKE |
| Switch-on Time-Max |
60ns |
| Switch-off Time-Max |
58ns |
| Voltage - Supply, Single (V+) |
2V~6V |
| Drain to Source Resistance |
90Ohm |
| Signal Current-Max |
0.025A |
| Height |
2.65mm |
| Length |
15.4mm |
| Width |
7.5mm |
| Thickness |
2.35mm |
| Radiation Hardening |
No |
| REACH SVHC |
No SVHC |
| RoHS Status |
ROHS3 Compliant |
| Lead Free |
Lead Free |
CD74HC4067M Overview
Shipping overseas is convenient due to the electrical component's packing in 24-SOIC (0.295, 7.50mm Width). The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 16:1. Temperatures around -55°C~125°C TA are extended for operation. 24 terminations have been made so far. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 24 series. A total of 1 circuits make up this switch device. Search with 74HC4067 if you are looking for analog multiplexer variants. An switch multiplexer with 160Ohm internal resistance has a value of 160Ohm. Please refer to the datasheets for 24 pins functions. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 6V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended to use 2V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 8μA current. This analogue multiplexer requires a voltage of 2V~6V when it drains from a single voltage supply. Operating the 16 inputs requires 16 inputs. There are 89MHz bandwidths for data transfer. Resistivity from Drain to Source is 90Ohm for this electronic part.
CD74HC4067M Features
1 Channels
8μA Supply Current
Bandwidth: 89MHz
Drain-to-Source resistance: 90Ohm
CD74HC4067M Applications
There are a lot of Texas Instruments CD74HC4067M Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Industrial
- Optical Applications
- Audio/video switches
- Automatic test equipment
- Channelized and Unchannelized DS3 applications
- DSLAMs
- Public switching systems
- Video signal routing
- CSU