CD74HC374M
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 165 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 50 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC374M Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. It is configured with Tri-State, Non-Invertedas an output. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. The operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74HC series. Its output frequency should not exceed 60MHz Hz. In total, there are 1 elements. There are 20 terminations,Members of the 74HC374family make up this object. It is powered from a supply voltage of 4.5V. This T flip flop has a capacitance of 10pF farads at the input. It is a member of the HC/UHfamily of D flip flop. It is mounted by the way of Surface Mount. This board is designed with 20pins on it. A Positive Edgeclock edge trigger is used in this device. This part is included in Bus Driver/Transceiver. Flip flops designed with 8bits are used in this part. Vsup reaches its maximum value at 6V. A normal operating voltage (Vsup) should remain above 2V. It runs on 2/6Vvolts of power. There are 2 ports embedded in the flip flops. The 7.8mA output current allows it to be designed with the greatest amount of flexibility. It operates with 3 output lines. Quiescent current is consumed by the D latch in the amount of 8μA. 8is the number of channels.
CD74HC374M Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
CD74HC374M Applications
There are a lot of Texas Instruments CD74HC374M Flip Flops applications.
- Load Control
- Registers
- Automotive
- Patented noise
- Bus hold
- Frequency Dividers
- Asynchronous counter
- Matched Rise and Fall
- Buffered Clock
- Frequency Divider circuits