CD74HC299ME4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMMON I/O PINS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 7.8mA |
| Low Level Output Current | 7.8mA |
| Number of Input Lines | 10 |
| fmax-Min | 23 MHz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC299ME4 Overview
As a result, SOIC package contains the embedded device. Chip terminations add up to 20. A Rail/Tube case is used to pack it. This part has an operating supply voltage of 4.5V. It has 20 pins. It is recommended to mount by Surface Mount. An electronic component is included in the HC/UH. A range of 5V is noted as the operating supply voltage of this chip. Taking note of the following additional details: COMMON I/O PINS; GATED OUTPUT CONTROL. In the device, there are 10 input lines that are available for use. There are 8 bits on the IC chip. There are a total of 20 pins on it. A temperature below 125°C is recommended for its use. Ideally, it should not fall below -55°C. It is used under the 6V supply voltage. This supply voltage is employed higher than 2V. In this device, there are 1 circuits that are active at the same time.
CD74HC299ME4 Features
With 20 pins
Operate supply voltage at 5V
CD74HC299ME4 Applications
There are a lot of Texas Instruments CD74HC299ME4 Shift Registers applications.
- data transfer
- Flash Memory
- Parallel data
- data manipulation
- Interconnectors
- ROM Chips
- Cache memory in CPU
- Sequence generator
- Parallel to serial converter
- store data in digital form