CD74HC195PWRG4
| Parameters | |
|---|---|
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
CD74HC195PWRG4 Overview
In package TSSOP, there is an embedded device. A total of 16 terminations can be found on the chip. It is used to pack in Tape & Reel (TR) case. Parts with a 4.5V operating supply voltage are specified. 1 elements are present in this part. 16 pins are provided on the device. Surface Mount is recommended for mounting. In this case, the electronic component belongs to the HC/UH. It is noted that this chip uses an operating supply voltage of 5V. The following additional elements are important to note: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. In the device, there are 6 input lines that are available for use. This board has 16 pins in total. Under temperatures below 125°C, it is recommended to use it. This device should not be operated below -55°C. This supply voltage is employed under 6V. It is necessary to use a voltage that is higher than 2V to provide this supply.
CD74HC195PWRG4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC195PWRG4 Applications
There are a lot of Texas Instruments CD74HC195PWRG4 Shift Registers applications.
- Counter
- temporary data storage
- Serial-to-parallel data conversion
- Pattern Recognizers
- Parallel data
- Data Processors
- store data in digital form
- Sequence generator
- Dual-rank shift, hold, and bus applications
- Pulse Extenders