CD74HC194PWG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC194PWG4 Overview
In package TSSOP, there is an embedded device. There are 16 terminations on the chip. Voltage rating of the part is 4.5V. A total of 1 elements are present on this part. It is equipped with a pin count of 16. As a general recommendation, mounting by Surface Mount is recommended. Electronic components are categorized as HC/UH. The operating supply voltage of this chip is noted to be within the range 5V. There are also the following additional considerations in this section: HOLD MODE. In this device, there are 6 input lines. The total number of pins is 16. At temperatures below 125°C, it is recommended for use. In order to operate the device, the value should not fall below -55°C. A voltage of this type is employed under 6V. It is used at a higher voltage than 2V. As a result, it runs at a quiescent current of 8μA.
CD74HC194PWG4 Features
With 16 pins
Operate supply voltage at 5V
Quiescent Current at 8μA
CD74HC194PWG4 Applications
There are a lot of Texas Instruments CD74HC194PWG4 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Interconnectors
- Parallel to serial converter
- LED matrix control
- Remote control holding register
- Pulse Extenders
- ROM Chips
- store data in digital form
- Counter
- 8-bit data storage