CD74HC194ME4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC194ME4 Overview
As a result, SOIC package contains the embedded device. The number of the chip's terminations sums up to 16. This part has an operating supply voltage of 4.5V. On this part, there are 1 elements. 16 pins are available on the device. The recommended mounting method is Surface Mount. The electronic component belongs to the HC/UH. In terms of supply voltage, this chip operates within the range of 5V. Please take note of the following additional aspects of this section: HOLD MODE. A device with 6 input lines is available. 16 pins are present on it. Under 125°C, it is recommended that it be used. It should not be lower than -55°C to operate this device. This supply voltage is employed under 6V. It is used at a voltage greater than 2V.
CD74HC194ME4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC194ME4 Applications
There are a lot of Texas Instruments CD74HC194ME4 Shift Registers applications.
- Parallel to serial converter
- Serial-to-parallel data conversion
- Pseudo Random Pattern Generator
- Remote control holding register
- Parallel data
- Flash Memory
- ROM Chips
- Generate time delay toward digital circuits
- Dual-rank shift, hold, and bus applications
- 7-segment display control