CD74HC194M96G4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC194M96G4 Overview
This device can be found embedded within the package SOIC. A total of 16 terminations can be found on the chip. It is packed in a case number Tape and Reel. 4.5V is the operating supply voltage of the part. On this part, there are 1 elements. In this device, there are 16 pins. Mounting by Surface Mount is recommended. Electronic components belong to the HC/UH group. It is noted that this chip uses an operating supply voltage of 5V. This section has the following additional features: HOLD MODE. As far as the device is concerned, there are 6 input lines available. It has a total of zero pins. It is recommended that it be used at temperatures below 125°C. In order to operate the device, the value should not fall below -55°C. 6V is the supply voltage used. This supply voltage is employed higher than 2V.
CD74HC194M96G4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC194M96G4 Applications
There are a lot of Texas Instruments CD74HC194M96G4 Shift Registers applications.
- Pseudo Random Pattern Generator
- Counter
- store data in digital form
- 7-segment display control
- Pulse Extenders
- ROM Chips
- Data Processors
- Interconnectors
- Serial to parallel converter
- Parallel data