CD74HC194M96E4
| Parameters | |
|---|---|
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
CD74HC194M96E4 Overview
This device can be found embedded within the package SOIC. There are 16 terminations on the chip. A Tape and Reel case holds it. This part has an operating supply voltage of 4.5V. The part consists of 1 elements. 16 pins are provided on the device. It is recommended to mount by Surface Mount in order to get the best results. In the HC/UH series, the electronic component belongs. As noted, this chip operates within the range of 5V. The following additional elements are important to note: HOLD MODE. The device has a total of 6 input lines. It has a total of 16 pins. A temperature below 125°C is recommended for its use. This device should not be operated with a value lower than -55°C. A voltage of 6V is used to supply this voltage. A voltage higher than 2V is used as a supply voltage.
CD74HC194M96E4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC194M96E4 Applications
There are a lot of Texas Instruments CD74HC194M96E4 Shift Registers applications.
- data transfer
- Serial-to-parallel data conversion
- Serial-to-parallel data conversion
- Data Processors
- data manipulation
- ROM Chips
- Output expansion
- Interconnectors
- Remote control holding register
- 8-bit data storage