CD74HC192PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC192 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Counter, Decade |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 325 ns |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 24MHz |
| Timing | Synchronous |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
CD74HC192PWG4 Overview
16-TSSOP (0.173, 4.40mm Width)is a package in which this device is packaged. It is configured using 16terminations. Having a supply voltage of 4.5V enables to operate in a fully flexible manner. A wire connects the 1elements. A total of 16pins are available on all components. As a result, it is packaged as Tube. Circuit components are connected by 16pins. The Surface Mountway is used to mount it. In this case, it emerges as a member of the HC/UH family. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. It is adopted that the logic type is [0]. Ideally, the operating temperature should be set to -55°C~125°C. Having a mounting type of [0], it is suitable for installation. Providing a voltage of 2V~6Vensures higher reliability of operation. An array consists of 4bits for each element. An important feature of this electronic device is [0]. Further related parts may be found under the base part number 74HC192. As a result of the voltage source, there is 2/6V voltage. The minimum supply voltage (Vsup) is as low as 2V. It is possible to provide a voltage up to 6V (Vsup).
CD74HC192PWG4 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
CD74HC192PWG4 Applications
There are a lot of Texas Instruments CD74HC192PWG4 Counters & Dividers applications.
- SQUARING
- Up Counters
- Clocks
- Fixed and programmable counters greater than 10
- counting/frequency sy nthesizers-BCD output
- Time-delay circuits
- Divide-by"N" counters/frequency synthesizers
- Signal gating
- POWER COMPUTATION
- Divide-by-N counting