CD74HC173MG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC173 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 7.8mA |
| Number of Bits | 4 |
| Clock Frequency | 60MHz |
| Propagation Delay | 200 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.0078 A |
| Max Propagation Delay @ V, Max CL | 34ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 60 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC173MG4 Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. Package Tubeembeds it. T flip flop uses Tri-State, Non-Invertedas the output. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. With a supply voltage of 2V~6V volts, it operates. -55°C~125°C TAis the operating temperature. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 74HC series. You should not exceed 60MHzin the output frequency of the device. The element count is 1 . Currently, there are 16 terminations. The object belongs to the 74HC173 family. It is powered from a supply voltage of 4.5V. There is 10pF input capacitance for this T flip flop. An electronic device belonging to the family HC/UHcan be found here. Electronic part Surface Mountis mounted in the way. The 16pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 4bits in its design. As soon as 6Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 2V. The system runs on a power supply of 5V watts. With an output current of 7.8mA, this device offers maximum design flexibility. It has 4lines. In terms of quiescent current, it consumes 8μA . Additionally, you may refer to the additional WITH DUAL OUTPUT ENABLE of the electronic flip flop.
CD74HC173MG4 Features
Tube package
74HC series
16 pins
4 Bits
5V power supplies
CD74HC173MG4 Applications
There are a lot of Texas Instruments CD74HC173MG4 Flip Flops applications.
- Data storage
- Latch
- Power down protection
- Circuit Design
- Communications
- Computers
- Memory
- Data Synchronizers
- Control circuits
- Guaranteed simultaneous switching noise level