CD74HC138QM96G4Q1
| Parameters | |
|---|---|
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC138 |
| Pin Count | 16 |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 30 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
CD74HC138QM96G4Q1 Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).The package is in the form of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.When the operating temperature is kept at -40°C~125°C, turn signal switch will not be susceptible to external factors.When operated with a 2V~6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers from the Automotive, AEC-Q100, 74HC series can be used in a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.As its base part number is 74HC138, logic switch can also be used to find its related parts.The multiplexer's system works with 4.5V voltage.This turn signal switch contains 16 component pins.Conductors terminate at GULL WING in this design.Single is used as its supply type.Currently, it is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch is included into the family of HC/UH.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.In order for 2/6V to operate normally, a power supply is provided.Decoder/Drivers is the classification for this the digital switch ic.No external influence consumes 8μA current of multiplexer ic.It is possible to accept voltage levels through 3 input lines of multiplexers.As the signal source, there are 8 output lines.
CD74HC138QM96G4Q1 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
3 input lines
8 output lines
CD74HC138QM96G4Q1 Applications
There are a lot of Texas Instruments CD74HC138QM96G4Q1 Signal Switches / Multiplexers / Decoders applications.
- Steel plants
- Textile mills
- CNC machines
- Transmission from the computer system of a satellite
- Enabling block of memory depending on address in memory chips
- Microprocessor instruction decoding
- Speed synchronization of multiple motors in industries
- Automatic Monitoring systems
- Idle motor
- Data transfer