CD74HC137PWT
| Parameters | |
|---|---|
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC137 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 36 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 270 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer, Latch |
| Number of Inputs | 3 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 54 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Input Conditioning | LATCHED |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
CD74HC137PWT Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.Tape & Reel (TR) is the method used for packaging.For mounting, digital switch ic uses the method Surface Mount.The analog IC used in the multiplexers can be referred to as Decoder/Demultiplexer.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 2V~6V voltage.Multiplexers of the 74HC series can be used in a wide range of applications.Among its basic configurations are 16 terminations.There is a base part number 74HC137 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 4.5V volts.Signal switch has 16 component pins.It is the end of conductors that is represented by GULL WING.There is a supply type of Single employed as part of this supply.There are 16 pins on it.This unit is mounted in the way of Surface Mount.There is a family of HC/UH members.Vsup should be kept at 2V to prevent some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 6V in order to prevent some unnecessary failures.There is a power supply provided for the mux switch's normal operation of 2/6V.The turn signal switch has 8 outputs.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.Without external influences, it consumes 8μA current of multiplexer ic.This multiplexer has 3 inputs.The switches package is packaged in a way which is consistent with TAPE AND REEL.
CD74HC137PWT Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
CD74HC137PWT Applications
There are a lot of Texas Instruments CD74HC137PWT Signal Switches / Multiplexers / Decoders applications.
- Night vision cameras
- Enabling block of memory depending on address in memory chips
- Relay
- To select different devices in microprocessor input
- Control unit of Central Processing unit (CPU)
- Medical industry
- Microprocessor memory systems
- Computer memory
- Frequency multiplexing system
- HD surveillance system