CD74HC109M

CD74HC109M

2V~6V 60MHz JK Type Flip Flop DUAL 74HC109 16 Pins 74HC Series 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-CD74HC109M
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 798
  • Description: 2V~6V 60MHz JK Type Flip Flop DUAL 74HC109 16 Pins 74HC Series 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 6 Weeks
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature -55°C~125°C TA
Packaging Tube
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type JK Type
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 4.5V
Base Part Number 74HC109
Function Set(Preset) and Reset
Output Type Differential
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Number of Channels 2
Load Capacitance 50pF
Output Current 5.2mA
Clock Frequency 60MHz
Propagation Delay 175 ns
Quiescent Current 4μA
Turn On Delay Time 14 ns
Family HC/UH
Logic Function AND, Flip-Flop, JK-Type
Current - Output High, Low 5.2mA 5.2mA
Max I(ol) 0.006 A
Number of Bits per Element 1
Max Propagation Delay @ V, Max CL 30ns @ 6V, 50pF
Prop. Delay@Nom-Sup 53 ns
Trigger Type Positive Edge
Input Capacitance 10pF
Schmitt Trigger No
Power Supply Current-Max (ICC) 0.04mA
Clock Edge Trigger Type Positive Edge
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD74HC109M Overview


The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. There is an embedded version in the package Tube. This output is configured with Differential. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. Temperature is set to -55°C~125°C TA. The type of this D latch is JK Type. In this case, it is a type of FPGA belonging to the 74HC series. You should not exceed 60MHzin the output frequency of the device. A total of 16terminations have been recorded. D latch belongs to the 74HC109 family. The power source is powered by 4.5V. Its input capacitance is 10pFfarads. A device of this type belongs to the family of HC/UH. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. This device has Positive Edgeas its clock edge trigger type. This device has the base part number FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. Its output current of 5.2mAallows for maximum design flexibility. It consumes 4μA of quiescent current without being affected by external factors. There are 2 channels available.

CD74HC109M Features


Tube package
74HC series
16 pins

CD74HC109M Applications


There are a lot of Texas Instruments CD74HC109M Flip Flops applications.

  • ESD performance
  • Safety Clamp
  • Divide a clock signal by 2 or 4
  • Storage registers
  • Convert a momentary switch to a toggle switch
  • Load Control
  • Shift Registers
  • Power down protection
  • Automotive
  • Event Detectors

Write a review

Note: HTML is not translated!
    Bad           Good