CD74FCT374M96G4
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74FCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 48mA |
| Number of Bits | 8 |
| Clock Frequency | 70MHz |
| Propagation Delay | 6.6 ns |
| Turn On Delay Time | 6.6 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Max Propagation Delay @ V, Max CL | 6.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
CD74FCT374M96G4 Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is contained within the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. The supply voltage is set to 4.75V~5.25V. 0°C~70°C TAis the operating temperature. This logic flip flop is classified as type D-Type. It belongs to the 74FCTseries of FPGAs. A frequency of 70MHzshould not be exceeded by its output. D latch consists of 1 elements. There is a consumption of 8μAof quiescent energy. Currently, there are 20 terminations. If you search by 74FCT374, you will find similar parts. A voltage of 5V provides power to the D latch. JK flip flop input capacitance is 10pF farads. This D flip flop belongs to the family of FCT. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. The part is included in FF/Latches. There are 8bits in this flip flop. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from 5V power supplies. A total of 2ports are embedded in the D flip flop. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 48mA. There are 8 output lines in this JK flip flop.
CD74FCT374M96G4 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CD74FCT374M96G4 Applications
There are a lot of Texas Instruments CD74FCT374M96G4 Flip Flops applications.
- Balanced Propagation Delays
- Buffer registers
- Bus hold
- Functionally equivalent to the MC10/100EL29
- EMI reduction circuitry
- Cold spare funcion
- Synchronous counter
- Computers
- 2 – Bit synchronous counter
- Matched Rise and Fall