CD74ACT299M96G4
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 12.9 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 18.6 ns |
| Family | ACT |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| fmax-Min | 90 MHz |
| Max Frequency@Nom-Sup | 90000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.000539mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
CD74ACT299M96G4 Overview
SOIC package contains the device. A total of 20 terminations can be found on the chip. A Tape and Reel case holds it. Its operating supply voltage is rated at 5V. 20 pins are located on the device. It is recommended to mount by Surface Mount. It is a component of the ACT. In terms of supply voltage, this chip operates within the range of 5V. Additional aspects of this section are as follows: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. In the device, there are 10 input lines. There is a capability to deliver voltage at 5V. It has a total of 8 pins. It has a total of 20 pins. This product should not be used at temperatures above 125°C. It should not be less than -55°C when operating this device. We use this supply voltage under 5.5V. This supply voltage is employed higher than 4.5V. There is a quiescent current of 8μA flowing through it. There are 1 circuits in this device.
CD74ACT299M96G4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
Quiescent Current at 8μA
CD74ACT299M96G4 Applications
There are a lot of Texas Instruments CD74ACT299M96G4 Shift Registers applications.
- Data Format Converters
- Sequence generator
- Cache memory in CPU
- Output expansion
- LED matrix control
- Serial-to-parallel data conversion
- Flash Memory
- data manipulation
- Pseudo Random Pattern Generator
- Data manipulation