CD74ACT273E
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74ACT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 85MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 3.4 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 13.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT273E Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). The package Tubecontains it. In the configuration, Non-Invertedis used as the output. It is configured with a trigger that uses Positive Edge. Through Holeis in the way of this electric part. The supply voltage is set to 4.5V~5.5V. A temperature of -55°C~125°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74ACTseries contain this type of chip. You should not exceed 85MHzin its output frequency. In total, it contains 1 elements. There is 8μA quiescent consumption. A total of 20terminations have been recorded. The 74ACT273 family contains it. It is powered from a supply voltage of 5V. Input capacitance of this device is 10pF farads. It is a member of the ACTfamily of D flip flop. This electronic part is mounted in the way of Through Hole. 20pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. An electronic part with 8bits has been designed. Its superior flexibility is attributed to its use of 8 circuits. A total of 5V power supplies are needed to run it. For high efficiency, the supply voltage should be set to 5V. As a result of its output current of 24mA, it is very flexible in terms of design. In order to operate, the chip has 4 output lines.
CD74ACT273E Features
Tube package
74ACT series
20 pins
8 Bits
5V power supplies
CD74ACT273E Applications
There are a lot of Texas Instruments CD74ACT273E Flip Flops applications.
- Frequency Dividers
- QML qualified product
- Modulo – n – counter
- Registers
- Automotive
- ESD performance
- Pattern generators
- Differential Individual
- High Performance Logic for test systems
- Circuit Design