CD74ACT174E
| Parameters | |
|---|---|
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 6 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 80000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74ACT174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 6 |
| Clock Frequency | 80MHz |
| Propagation Delay | 14 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
CD74ACT174E Overview
16-DIP (0.300, 7.62mm)is the way it is packaged. The package Tubecontains it. In the configuration, Non-Invertedis used as the output. It is configured with the trigger Positive Edge. Through Holeis in the way of this electric part. A voltage of 4.5V~5.5Vis used as the supply voltage. The operating temperature is -55°C~125°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74ACTseries of FPGAs. It should not exceed 80MHzin terms of its output frequency. A total of 1elements are present in it. Terminations are 16. The object belongs to the 74ACT174 family. It is powered by a voltage of 5V . There is 10pF input capacitance for this T flip flop. The electronic device belongs to the ACTfamily. In this case, the electronic component is mounted in the way of Through Hole. A total of 16pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. It is designed with a number of bits of 6. 7 circuits are used to achieve its superior flexibility. In order for the device to operate, it requires 5V power supplies. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. With a current output of 24mA , it offers maximum design flexibility. 6input lines are available for you to choose from. 8μAquiescent current consumed.
CD74ACT174E Features
Tube package
74ACT series
16 pins
6 Bits
5V power supplies
CD74ACT174E Applications
There are a lot of Texas Instruments CD74ACT174E Flip Flops applications.
- Parallel data storage
- Balanced Propagation Delays
- Cold spare funcion
- Safety Clamp
- Common Clocks
- Power down protection
- Counters
- Memory
- Test & Measurement
- Bus hold