CD74AC174M96
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 6 |
| Clock Frequency | 95MHz |
| Propagation Delay | 181 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.4 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 13.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
CD74AC174M96 Overview
It is packaged in the way of 16-SOIC (0.154, 3.90mm Width). The package Tape & Reel (TR)contains it. Non-Invertedis the output configured for it. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 1.5V~5.5V. -55°C~125°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74AC series. This D flip flop should not have a frequency greater than 95MHz. The element count is 1 . Currently, there are 16 terminations. The 74AC174 family contains it. A voltage of 3.3V is used as the power supply for this D latch. There is 10pF input capacitance for this T flip flop. In this case, the D flip flop belongs to the ACfamily. Surface Mount mounts this electronic component. A total of 16pins are provided on this board. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latches. The design is based on 6bits. Vsup reaches 5.5V, the maximal supply voltage. To achieve this superior flexibility, 7 circuits are used. In light of its reliable performance, this T flip flop is well suited for TR. It runs on 3.3/5Vvolts of power. The 24mA output current allows it to be designed with the greatest amount of flexibility. There are 6 output lines on it. It consumes 8μA of quiescent current without being affected by external factors.
CD74AC174M96 Features
Tape & Reel (TR) package
74AC series
16 pins
6 Bits
3.3/5V power supplies
CD74AC174M96 Applications
There are a lot of Texas Instruments CD74AC174M96 Flip Flops applications.
- Shift registers
- ATE
- Reduced system switching noise
- Parallel data storage
- Differential Individual
- ESD protection
- Circuit Design
- ESCC
- Common Clocks
- Clock pulse