CD4555BNSR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | CD4555 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Number of Elements | 2 |
| Circuit | 1 x 2:4 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 190 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 440 ns |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 6.8mA 6.8mA |
| Supply Type | Dual |
| Bandwidth | 8MHz |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Input Lines | 1 |
| Voltage Supply Source | Dual Supply |
| Input Conditioning | STANDARD |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4555BNSR Overview
Due to the fact that it is provided in the 16-SOIC (0.209, 5.30mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) is the packaging method.In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.When the operating temperature is kept at -55°C~125°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 3V~18V supply voltage, which gives it a lot of flexibility.As a member of 4000B series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 16 terminations.The base part number is CD4555, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V voltage.This turn signal switch consists of 16 component pins.It is the end of conductors that is represented by GULL WING.Its supply type is Dual, which is used as the source of power.Currently, it is configured with 16 pins.It is positioned in the direction of Surface Mount.In the signal multiplexer, there are 4 bits available.Keeping Vsup at 3V will prevent some unwanted failures.For the turn signal switch's operation, there are 4 outputs.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.Without any external influences, it consumes 100μA current of multiplexer ic at all times.TR is used to package the switches.For the purpose of accepting voltage levels, the multiplexers have 1 input lines.In mux switch configuration, there are 2 elements.
CD4555BNSR Features
Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Dual
1 input lines
CD4555BNSR Applications
There are a lot of Texas Instruments CD4555BNSR Signal Switches / Multiplexers / Decoders applications.
- Computer memory
- Electronically controlled engine system
- Data communication
- Night vision cameras
- Data-routing applications
- Enabling different rows of memory depending on address in memory chips
- Injectors
- Metal detectors
- Arithmetic Logic Units
- Automatic Monitoring systems