CD4094BPWG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLIMENTARY SERIAL OUTPUT ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Number of Bits | 8 |
| Propagation Delay | 190 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 840 ns |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 10 |
| fmax-Min | 3 MHz |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4094BPWG4 Overview
As a result, TSSOP package contains the embedded device. Taking the total number of terminations on the chip and adding them up, we get 16. The part's operating supply voltage is rated 5V. On this part, there are 1 elements. Devices with 16 pins are available. Using Surface Mount as a mount point is recommended. It is noted that this chip uses an operating supply voltage of 15V. Please take note of the following additional aspects of this section: COMPLIMENTARY SERIAL OUTPUT ALSO AVAILABLE. There are 8 bits on the IC chip. In total, there are 16 pins on it. It should be used below 125°C. This device should not be operated with a value lower than -55°C. A voltage of this type is employed under 18V. It is important to note that this supply voltage is higher than 3V. The number of output lines to be operated is 10. It runs with a quiescent current of 100μA. This subcategory falls under the Shift Registers category.
CD4094BPWG4 Features
With 16 pins
Operate supply voltage at 15V
With 10 output lines
Quiescent Current at 100μA
CD4094BPWG4 Applications
There are a lot of Texas Instruments CD4094BPWG4 Shift Registers applications.
- Parallel to serial converter
- Output expansion
- Data Format Converters
- store data in digital form
- Flash Memory
- Pulse Extenders
- 8-bit data storage
- data transfer
- Delay Line
- temporary data storage