CD4076BPW
| Parameters | |
|---|---|
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4076 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Clock Frequency | 16MHz |
| Propagation Delay | 600 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 60 ns |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max Propagation Delay @ V, Max CL | 180ns @ 15V, 50pF |
| Prop. Delay@Nom-Sup | 250 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Input Lines | 4 |
| Input Current | 100nA |
| fmax-Min | 8 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000Hz |
| Height | 1.2mm |
CD4076BPW Overview
The package is in the form of 16-TSSOP (0.173, 4.40mm Width). D flip flop is embedded in the Tube package. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 3V~18Vsupply voltage is required for it to operate. It is operating at -55°C~125°C TA. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 4000B series. It should not exceed 16MHzin its output frequency. The element count is 1 . It consumes 20μA of quiescent current without being affected by external factors. A total of 16 terminations have been made. The CD4076 family contains this object. An input voltage of 5Vpowers the D latch. JK flip flop input capacitance is 5pF farads. The electronic part is mounted in the way of Surface Mount. There are 16pins on it. There is a clock edge trigger type of Positive Edgeon this device. The part you are looking for is included in FF/Latches. There are 4bits in its design. A normal operating voltage (Vsup) should remain above 3V. Featuring the maximum design flexibility, it has an output current of 6.8mA . 4input lines are available for you to choose from. This D latch consumes 100μA quiescent current at all.
CD4076BPW Features
Tube package
4000B series
16 pins
4 Bits
CD4076BPW Applications
There are a lot of Texas Instruments CD4076BPW Flip Flops applications.
- Data transfer
- High Performance Logic for test systems
- Memory
- Data Synchronizers
- Balanced 24 mA output drivers
- 2 – Bit synchronous counter
- Instrumentation
- Modulo – n – counter
- ESD protection
- Communications