CD4076BM96G4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4076 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 16MHz |
| Propagation Delay | 600 ns |
| Turn On Delay Time | 60 ns |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max Propagation Delay @ V, Max CL | 180ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 4 |
| fmax-Min | 8 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4076BM96G4 Overview
16-SOIC (0.154, 3.90mm Width)is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. There is a Tri-State, Non-Invertedoutput configured with it. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 3V~18Vis required for its operation. Temperature is set to -55°C~125°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 4000B series. You should not exceed 16MHzin the output frequency of the device. D latch consists of 1 elements. This process consumes 20μA quiescents. Terminations are 16. You can search similar parts based on CD4076. The power source is powered by 5V. The input capacitance of this JK flip flopis 5pF farads. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. The design is based on 4bits. The supply voltage (Vsup) should be maintained above 3V for normal operation. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. There are no output lines on the JK flip flop.
CD4076BM96G4 Features
Tape & Reel (TR) package
4000B series
16 pins
4 Bits
CD4076BM96G4 Applications
There are a lot of Texas Instruments CD4076BM96G4 Flip Flops applications.
- Parallel data storage
- Differential Individual
- Bounce elimination switch
- Latch
- Event Detectors
- Functionally equivalent to the MC10/100EL29
- Common Clocks
- Data Synchronizers
- Dynamic threshold performance
- Counters