CD4076BM
| Parameters | |
|---|---|
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4076 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Clock Frequency | 16MHz |
| Propagation Delay | 600 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 60 ns |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max Propagation Delay @ V, Max CL | 180ns @ 15V, 50pF |
| Prop. Delay@Nom-Sup | 250 ns |
| Trigger Type | Positive Edge |
| Max Input Current | 1μA |
| Input Capacitance | 5pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Input Lines | 4 |
| fmax-Min | 8 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
CD4076BM Overview
It is packaged in the way of 16-SOIC (0.154, 3.90mm Width). You can find it in the Tubepackage. Tri-State, Non-Invertedis the output configured for it. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 3V~18V. It is operating at a temperature of -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 4000B series. You should not exceed 16MHzin the output frequency of the device. A total of 1elements are present in it. T flip flop consumes 20μA quiescent energy. Terminations are 16. This D latch belongs to the family of CD4076. A voltage of 5V is used to power it. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. The electronic part is mounted in the way of Surface Mount. This board is designed with 16pins on it. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. 4bits are used in its design. The supply voltage (Vsup) should be maintained above 3V for normal operation. It offers maximum design flexibility with its output current of 6.8mA. It has 4lines. Quiescent current is consumed by the D latch in the amount of 100μA.
CD4076BM Features
Tube package
4000B series
16 pins
4 Bits
CD4076BM Applications
There are a lot of Texas Instruments CD4076BM Flip Flops applications.
- Safety Clamp
- Convert a momentary switch to a toggle switch
- Single Down Count-Control Line
- Frequency Divider circuits
- Guaranteed simultaneous switching noise level
- CMOS Process
- ESCC
- Set-reset capability
- Modulo – n – counter
- Clock pulse