CD4051BPWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 240Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD4051 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 18V |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100μA |
| Propagation Delay | 10 ns |
| Quiescent Current | 80nA |
| Turn On Delay Time | 720 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 3V~20V ±2.5V~9V |
| Supply Type | Dual, Single |
| Bandwidth | 20MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 9V |
| On-State Resistance (Max) | 240Ohm |
| Min Dual Supply Voltage | 2.5V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 30pF |
| On-state Resistance Match-Nom | 15Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 240Ohm |
| Normal Position | NC |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4051BPWR Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Cut Tape (CT). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 8:1. Extended operating temperature around -55°C~125°C TA. In total, there are 16 terminations. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. It consists of 1 circuits. Search with CD4051 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 240Ohm. The datasheets for the 16 pins explain the functions. In a normalsituation, users should not supply the switches with voltage higher than 20V. Analog switch ics with Dual, Single supply type are cost-effective. 3V should be the lowest voltage fed to the electronic component. The analogue multiplexer may be damaged if voltage is greater than 100μA. For this switch, a dual supply voltage is feasible, but it must not exceed 9VIt is recommended that you attach at least 2.5V to your dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages of 18V are compatible with the electrical part. The electrical component supports 8 inputs. A 20MHz-bandwidth can be used for data transfer. This electronic component presents a Drain to Source resistance of 240Ohm.
CD4051BPWR Features
8 Channels
Bandwidth: 20MHz
Drain-to-Source resistance: 240Ohm
CD4051BPWR Applications
There are a lot of Texas Instruments CD4051BPWR Analog Switches & Multiplexers ICs applications.
- PBXs
- Sample hold systems
- Digital cross connects (DSX-1)
- Digital Cross-Connects
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Data switching
- Cable PC
- FTTH
- Modems
- Ultrasound