CD4044BE
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD4044 |
| Pin Count | 16 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 50 ns |
| Logic Function | Latch, NAND |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | S-R Latch |
| Trigger Type | LOW LEVEL |
| Input Capacitance | 5pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Input Lines | 8 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4044BE Overview
Package 16-DIP (0.300, 7.62mm) includes it. It is packaged in the way of Tube. There is a Tri-State output configured. A S-R Latch logic type is used in this electrical device. The way in which this electronic part is mounted is Through Hole. A 3V~18V voltage supply is required for operation. The operating temperature is -55°C~125°C. 4000B is the series number of this FPGA. 4 Bits are used in the design of this electronic part. This device has been designed with 16 terminations available. The family it belongs to is CD4044. With a supply voltage of 5V, it operates. The 16 pind are equipped with it. The device has 16 pins. The electronic part is mounted using the Through Hole method. There is a subcategory of FF/Latches for this part. A supply voltage (Vsup) greater than 3V is required. Electronic circuits comprise 8 input lines. Due to its 6.8mA output current, it offers maximum design flexibility. Aquiescent current is consumed by 20μA without being affected by external forces. A total of 1 elements make up this object. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.06mA.
CD4044BE Features
16-DIP (0.300, 7.62mm) package
4000B series
4 Bits
CD4044 family
16 pin count
16 pins
1 elements
CD4044BE Applications
There are a lot of Texas Instruments CD4044BE Latches applications.
- Serial Output Data Queuing
- Shift register
- Frequency
- Bus system register with enable parallel lines at bus side
- High-speed logic
- Automotive Body Electronics
- Ring counter
- Motor Drives
- Decade counting
- Automotive HEV/EV Powertrain