CD40175BNSRE4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Supplier Device Package | 16-SO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 3V~18V |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Clock Frequency | 14MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| RoHS Status | ROHS3 Compliant |
CD40175BNSRE4 Overview
The flip flop is packaged in 16-SOIC (0.209, 5.30mm Width). As part of the package Tape & Reel (TR), it is embedded. T flip flop is configured with an output of Differential. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. A supply voltage of 3V~18V is required for operation. Temperature is set to -55°C~125°C TA. The type of this D latch is D-Type. The FPGA belongs to the 4000B series. It should not exceed 14MHzin terms of its output frequency. In total, it contains 1 elements. It consumes 4μA of quiescent current without being affected by external factors. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded.
CD40175BNSRE4 Features
Tape & Reel (TR) package
4000B series
CD40175BNSRE4 Applications
There are a lot of Rochester Electronics, LLC CD40175BNSRE4 Flip Flops applications.
- Buffered Clock
- Bus hold
- ATE
- Data Synchronizers
- Storage Registers
- Guaranteed simultaneous switching noise level
- Asynchronous counter
- Communications
- Functionally equivalent to the MC10/100EL29
- Dynamic threshold performance