CD40174BMT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 3V~18V |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 16MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| RoHS Status | ROHS3 Compliant |
CD40174BMT Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). As part of the package Tape & Reel (TR), it is embedded. It is configured with Non-Invertedas an output. JK flip flop uses Positive Edgeas the trigger. Surface Mountis occupied by this electronic component. A 3V~18Vsupply voltage is required for it to operate. A temperature of -55°C~125°C TAis considered to be the operating temperature. The type of this D latch is D-Type. The FPGA belongs to the 4000B series. Its output frequency should not exceed 16MHz Hz. A total of 1elements are contained within it. As a result, it consumes 4μA quiescent current and is not affected by external forces. Input capacitance of this device is 5pF farads.
CD40174BMT Features
Tape & Reel (TR) package
4000B series
CD40174BMT Applications
There are a lot of Rochester Electronics, LLC CD40174BMT Flip Flops applications.
- Data transfer
- Buffer registers
- 2 – Bit synchronous counter
- Latch
- Instrumentation
- Frequency division
- Safety Clamp
- Synchronous counter
- Reduced system switching noise
- Functionally equivalent to the MC10/100EL29