CC3200R1M1RGCR
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | SimpleLink™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Type | TxRx + MCU |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2.1V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.4GHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CC3200 |
| Interface | I2C, SPI, UART |
| Memory Size | 128kB RAM 64kB ROM |
| Number of I/O | 27 |
| Speed | 80 MHz |
| RAM Size | 128kB |
| Peripherals | I2C |
| Bit Size | 32 |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | NO |
| Protocol | 802.11b/g/n |
| ROM (words) | 65536 |
| Power - Output | 18.3dBm |
| RF Family/Standard | WiFi |
| Number of UART Channels | 2 |
| Data Rate (Max) | 54Mbps |
| Serial Interfaces | I2C, I2S, JTAG, SPI, UART |
| Current - Receiving | 53mA~59mA |
| Current - Transmitting | 53mA~59mA |
| Modulation | DSSS, OFDM |
| ROM Programmability | FLASH |
| Sensitivity (dBm) | -95.7 dBm |
| GPIO | 27 |
| Height | 1mm |
| Length | 9mm |
| Width | 9mm |
| Thickness | 880μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CC3200R1M1RGCR Overview
It saves RF transceiver IC's board space with the 64-VFQFN Exposed Pad package. It is possible to mount the RF transceiver's mounting using Surface Mount.It emergys as a TxRx + MCU with transceiver RF's high efficiency and reliable performance.High reliability is achieved with advanced transceiver RF' packaging Tape & Reel (TR).64 pins are on the transceiver RF circuit board.Try searching for CC3200 variants of the transceiver.As you can see, this RF transceiver comes from the well-known SimpleLink? series of products.Frequency 2.4GHz is the basis of operation.
CC3200R1M1RGCR Features
64-VFQFN Exposed Pad package
Surface Mount for mounting
TxRx + MCU
Tape & Reel (TR) is used
64 pins
Use CC3200
SimpleLink? series
CC3200R1M1RGCR Applications
There are a lot of Texas Instruments CC3200R1M1RGCR RF Transceiver ICs applications.
- Remote Device Management
- Patient Asset Tracking
- Smart Meters
- LoT applications
- Transmit
- HVAC
- Receive
- Remote Control
- Switch