CC2650F128RGZT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | SimpleLink™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Type | TxRx + MCU |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 1.8V~3.8V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.4GHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CC2650 |
| Interface | I2C, SPI, UART |
| Memory Size | 128kB Flash 28kB SRAM |
| Number of I/O | 31 |
| RAM Size | 20kB |
| Memory Type | FLASH |
| Bit Size | 16 |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Density | 1 Mb |
| Protocol | 6LoWPAN, Bluetooth v5.1, Zigbee® |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED-POINT |
| Power - Output | 5dBm |
| Integrated Cache | YES |
| RF Family/Standard | 802.15.4, Bluetooth |
| RAM (words) | 28 |
| Data Rate (Max) | 1Mbps |
| Number of ADC Channels | 8 |
| Serial Interfaces | I2C, I2S, JTAG, SPI, UART |
| Current - Receiving | 5.9mA~6.1mA |
| Current - Transmitting | 6.1mA~9.1mA |
| Number of Serial I/Os | 1 |
| Number of Timers | 4 |
| Modulation | DSSS, O-QPSK, GFSK |
| Sensitivity (dBm) | -100 dBm |
| Number of SPI Channels | 1 |
| Height | 1mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CC2650F128RGZT Overview
Board space is saved by RF transceiver IC's 48-VFQFN Exposed Pad package.As a RF transceiver's mounting method, Surface Mount is used.As a TxRx + MCU, it has high efficiency and reliability.High reliability is achieved with advanced transceiver RF' packaging Tape & Reel (TR).A transceiver RF circuit board with 48 pins is designed.Try searching with CC2650 to find transceiver variants.The mount is attached to Surface Mount.The RF transceiver is a kind of the well-known SimpleLink? series of products.A frequency of 2.4GHz is used to operate RF transceiver.
CC2650F128RGZT Features
48-VFQFN Exposed Pad package
Surface Mount for mounting
TxRx + MCU
Tape & Reel (TR) is used
48 pins
Use CC2650
SimpleLink? series
CC2650F128RGZT Applications
There are a lot of Texas Instruments CC2650F128RGZT RF Transceiver ICs applications.
- LoT applications
- Secure Payment
- Location and Asset Tracking
- Consumer Electronics
- Health care
- Internet Radio
- Smart Meters
- Power Amplifier (PA)
- Automotive