CBT3306PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74CBT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 6.8Ohm |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3306 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 5 ns |
| Quiescent Current | 3μA |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Screening Level | AEC-Q100 |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.1mm |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
CBT3306PW-Q100J Overview
Providing this information in the 8-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.The package is packaged in accordance with Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers in the 74CBT series are suitable for a wide range of applications.It is designed with 8 terminations as part of its basic configuration.The base part number is 74CBT3306, which is also useful when looking up signal switch's related components.The multiplexer is supplied with 5V voltage.This turn signal switch has 8 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.It is configured with 8 pins.Surface Mount is the way it is mounted.The logic switch is a member of the family of CBT/FST/QS/5C/B.Signal multiplexer contains 1 bits.No external influence consumes 3μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.This signal switching operates at a resistance of 2.It operates with a resistance of 6.8Ohm.The mux switch configuration consists of 2 elements.
CBT3306PW-Q100J Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBT3306PW-Q100J Applications
There are a lot of Nexperia USA Inc. CBT3306PW-Q100J Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Microprocessor input/output systems
- Analog, digital or video signal switching
- War field flying robot with a night vision flying camera
- Automation system
- Video transmission
- Frequency multiplexing system
- Data communication
- Seven segment displays
- Data demultiplexing