BTT60301EKAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Resistance | 62mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.6W |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 28V |
| Interface | On/Off |
| Nominal Supply Current | 4.8mA |
| Output Configuration | High Side |
| Power Dissipation | 1.6W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 150 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 28V |
| Turn-Off Delay Time | 150 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 31m Ω |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTT60301EKAXUMA1 Overview
Tape & Reel (TR) is the way it's packaged.This package is included in 14-SOIC (0.154, 3.90mm Width) Exposed Pad.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.The 14 pins are used to operate the LED driver.This results in the maximum output current dropping to 6A to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.Lighting drivers with 62mOhm resistance are used.In this case, the output current will be set to 6A.In order to maximize efficiency, the supply voltage should be set at 28V.
BTT60301EKAXUMA1 Features
Resistance of 62mOhm
BTT60301EKAXUMA1 Applications
There are a lot of Infineon Technologies BTT60301EKAXUMA1 Power Switches ICs applications.
- Hot-Swap Systems
- Portable Video Game Players
- Hot Swap
- Notebook and Tablet Computers
- Storage Drives
- Portable/Handheld Devices
- Portable GPS Device
- Low Voltage I/O System Power
- Wireless Headsets
- Gaming