BTT60101ERAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, PROFET® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Additional Feature | ADDITIONAL EXTENDED OPERATING VOLTAGE 5 TO 48 V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Current - Output (Max) | 9A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 10m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
BTT60101ERAXUMA1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It's included in the 14-SOIC (0.154, 3.90mm Width) Exposed Pad package.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It has a total of 14 terminations.Currently, the lighting driver has a total of 1 functions.In terms of output, the lighting driver can provide a maximum of 9A V.As long as the supply voltage is 28V, high efficiency can be achieved.This electrical component is included in the Automotive, AEC-Q100, PROFET? series.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).Normal operation requires a voltage above 8V for the supply voltage.As a result of using this lighting driver, ADDITIONAL EXTENDED OPERATING VOLTAGE 5 TO 48 V can also be produced.
BTT60101ERAXUMA1 Features
Supplied from 28V
Additional features like ADDITIONAL EXTENDED OPERATING VOLTAGE 5 TO 48 V
BTT60101ERAXUMA1 Applications
There are a lot of Infineon Technologies BTT60101ERAXUMA1 Power Switches ICs applications.
- Telecom and Network Systems
- Hard Disk Drives
- Wireless Headsets
- HDD, SSD
- USB Ports/Hubs
- Notebook and Tablet Computers
- Portable/Handheld Devices
- Wireless Modem Data Cards
- USB3.1 Power Delivery
- Portable GPS