BTS5246-2L
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 12 |
| Qualification Status | Not Qualified |
| Max Output Current | 50A |
| Operating Supply Voltage | 28V |
| Power Supplies | 9/16V |
| Number of Channels | 2 |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 1.4W |
| Nominal Supply Current | 3.2mA |
| Max Supply Current | 4mA |
| Current - Output | 6A |
| Turn On Delay Time | 250 μs |
| Halogen Free | Halogen Free |
| Output Current per Channel | 6.3A |
| Turn-Off Delay Time | 250 μs |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Screening Level | AEC-Q100 |
| Output Peak Current Limit-Nom | 4.5A |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 7.5mm |
| Width | 6.4mm |
| RoHS Status | RoHS Compliant |
| Surface Mount | YES |
| Number of Pins | 12 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 19mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
BTS5246-2L Overview
Currently, there are 2 channels accessible.There are 12 terminations in total.In this case, the device is located at terminal DUAL.The device consists of a total of 12 pins.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 13.5V.This device uses 12 pins for operation.This gadget is self-contained in?Peripheral Drivers.In order to ensure stable operation, a maximum operating temperature of 150°C°C must be set.Maintaining reliability requires a minimum working temperature of -40°C degrees Celsius.Hot-swappable device is important to note that the part has a power supply 9/16V.28VV is the maximum supply voltage it can handle.If necessary, it can work with a low supply voltage, such as 4.5VV.When operating criteria are met, the maximum output current is reduced to 50A.Its maximum current requirement is 4mA.19mOhm resistance is present in the device.
BTS5246-2L Features
The terminal position of 12
BTS5246-2L Applications
There are a lot of Infineon Technologies BTS5246-2L hot swap controllers applications.
- Industrial application
- Limitting the inrush current
- Automotive circuits
- PC board hot swap insertion and removal
- Short-circuit protection in real time
- Raid
- Safe board insertion and extraction
- Active current limit
- Disconnect faulty loads before supply voltage drops
- Power supply hotswap & inrush control