BTS52422LAUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 12-BSOP (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 1mm |
| Base Part Number | BTS5242 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Current - Output (Max) | 5.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 4.5A |
| Rds On (Typ) | 19m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 7.5mm |
| Width | 6.4mm |
BTS52422LAUMA1 Overview
Tape & Reel (TR) is the way it's packaged.This package is included in 12-BSOP (0.295, 7.50mm Width) Exposed Pad.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.There are 2 outputs available on this lighting driver.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts has been specified.There are Auto Restart, Status Flag features available on the LED driving board.It belongs to the family BTS5242.The termination count is 12.There are 1 functions of the LED driver.The maximum output of the LED driving board is 5.5AV.Supply voltages of 13.5V allow for high efficiency.This electrical component is included in the PROFET? series.For normal operation, the supply voltage (Vsup) should be kept above 4.5V.
BTS52422LAUMA1 Features
Supplied from 13.5V
BTS52422LAUMA1 Applications
There are a lot of Infineon Technologies BTS52422LAUMA1 Power Switches ICs applications.
- Wearable Devices
- USB Ports/Hubs
- Hot Swaps
- Hot-Swap Systems
- Wireless Headsets
- HDD and SSD
- Portable/Handheld Devices
- USB Power Distribution
- Telecom and Network Systems
- USB Power Distribution