BTS5016SDAAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS5016 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 20V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 5.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~20V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 500 µs |
| Rds On (Typ) | 16m Ω |
| Turn Off Time | 500 µs |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 2.5mm |
| Length | 6.5mm |
| Width | 6.22mm |
| RoHS Status | ROHS3 Compliant |
BTS5016SDAAUMA1 Overview
It is package in Tape & Reel (TR) case.It's included in the TO-252-5, DPak (4 Leads + Tab), TO-252AD package.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.By default, it is set to output 1.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts has been specified.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.The BTS5016 family consists of this type.There are 4 terminations in it.The LED driving board has a total of 1 functions.Its maximum output voltage is 5.5AV.Supply voltages of 12V allow for high efficiency.The LED driver has a total of 4 pins.A component of this type is included in the PROFET? series.The lighting driver is configured to have a maximum supply voltage of 20V (Vsup).The supply voltage (Vsup) should be kept above 5.5V for normal operation.
BTS5016SDAAUMA1 Features
Supplied from 12V
BTS5016SDAAUMA1 Applications
There are a lot of Infineon Technologies BTS5016SDAAUMA1 Power Switches ICs applications.
- Mobile Communication Devices
- USB Power Distribution
- Low Voltage I/O System Power
- Solid-State Drives
- Portable/Handheld Devices
- Notebook PC
- Hot Swap
- Wireless Modem Data Cards
- Wireless Headsets
- Hot-Swap Systems