BTS410E2
| Parameters | |
|---|---|
| Package / Case | TO-220-5 |
| Surface Mount | NO |
| Number of Pins | 5 |
| JESD-609 Code | e0 |
| Number of Terminations | 5 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Resistance | 220mOhm |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 3 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.8A |
| Number of Channels | 1 |
| Max Supply Voltage | 42V |
| Min Supply Voltage | 4.7V |
| Power Dissipation-Max | 50W |
| Nominal Supply Current | 1mA |
| Power Dissipation | 75W |
| Max Supply Current | 2.1mA |
| Current - Output | 1.8A |
| Turn On Delay Time | 125 μs |
| Halogen Free | Not Halogen Free |
| Output Current per Channel | 1.8A |
| Drain to Source Voltage (Vdss) | 42V |
| Turn-Off Delay Time | 85 μs |
| Continuous Drain Current (ID) | 1.8A |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 1 |
| Dual Supply Voltage | 42V |
| Load Current | 1.8A |
| Output Peak Current Limit-Nom | 1.8A |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
BTS410E2 Overview
Package TO-220-5 includes it.Hot-swappable device is currently possible to access 1 channels.In total, it has 5 terminations.This device has a terminal position of ZIG-ZAG.In total, it has 3 pins.High efficiency can be achieved with a voltage supply of 12V.This device operates by using 5 pins.Despite its self-contained nature, Peripheral Drivers is a very compact device.In order to ensure stable operation, a maximum operating temperature of 150°C°C must be set.At a minimum working temperature of -40°C degrees Celsius, it maintains reliability.42VV is the maximum supply voltage that it can handle.With a 4.7VV supply voltage, it can work as low as possible.In order to meet the operation criteria, the maximum output current has to be reduced to 1.8A.During operation, it will require a maximum current of 2.1mA.220mOhm-resistance is one of the characteristics of the device.
BTS410E2 Features
The terminal position of 3
BTS410E2 Applications
There are a lot of Infineon Technologies BTS410E2 hot swap controllers applications.
- Circuit breakers for high-side circuits
- PC board hot swap insertion and removal
- Loads
- Current monitor output
- Limitting the inrush current
- Short-circuit protection in real time
- Storage network
- Redundant Array of Disks (RAID)
- Networking
- High power circuit board